products details

Home > Products >

CNC Mechanical Parts

CNC Machined 6061-T6 Aluminum EMI Shielding Enclosure with 60-100dB Effectiveness and Precision Seams

All Category

CNC Manufacturing Solutions

Mrs. Yang

kristen.yang@jinbo-china.com

+86 13798898651

Y13798898651

Contact Now

CNC Machined 6061-T6 Aluminum EMI Shielding Enclosure with 60-100dB Effectiveness and Precision Seams

Detail Information

Product Description

Detail Information

Material:

Aluminum 6061-T6

Shielding Effectiveness:

60-100dB From 100kHz To 1GHz

Wall Thickness:

1.5mm Minimum

Seam Flatness:

<0.05mm

Max Dimensions:

500mm X 400mm X 300mm

Surface Treatment:

Chromate Conversion Coating, Anodize (Type II Or III), Conductive Paint

Product Description

CNC Machined Aluminum 6061 EMI Shielding Enclosure for Electronics

Electromagnetic interference is the silent killer of electronic systems. It doesn't blow up your circuit board or melt connectors, but it makes digital signals unreliable enough that processors misread data. By the time you identify the root cause, you've typically burned through multiple testing rounds and significant schedule time.

Aluminum 6061 is the preferred material for EMI shielding enclosures due to its electrical conductivity, machinability for complex geometries with tight seams, lightweight properties for portable electronics, and cost-effectiveness that doesn't require separate business case justification.

The critical engineering aspect of EMI shielding enclosures lies in seam design and joint treatment. An EMI enclosure's effectiveness depends on its worst gap - a 0.5mm seam gap can leak enough RF energy to reduce shielding effectiveness by 20-30dB. This necessitates precisely machined mating surfaces (better than 0.05mm flatness over seam length) and consistent, well-prepared mounting surfaces for EMI gaskets or conductive finger stock.

We machine EMI enclosures from solid 6061 billets using 3-axis and 5-axis milling. Machining from solid provides precise wall thickness control, eliminates draft angles and parting lines, and enables integration of internal features like heatsink fins, mounting bosses, and cable gland recesses directly into enclosure walls.

Key Features

Material: Aluminum 6061-T6 per ASTM B211, with full MTR and conductivity certification
Shielding Effectiveness: 60-100dB from 100kHz to 1GHz (design-dependent), verified by third-party EMC testing on request
Wall Thickness: Uniform 1.5mm minimum wall, with +/-0.1mm thickness control on critical shielding walls
Seam Flatness: <0.05mm across mating surfaces - critical for EMI gasket compression consistency
Internal Features: Integrated heatsink fins, mounting bosses, cable gland pockets, and PCB standoffs machined directly into enclosure
Surface Treatment: Chromate conversion coating, anodize (Type II or III), or conductive paint for enhanced shielding

Technical Specifications

Specification	Details
Product Name	CNC Machined Aluminum 6061 EMI Shielding Enclosure
Material Options	Al 6061-T6, Al 5052-H32 (weldable), Al 7075-T6 (high strength)
Tolerance	+/-0.05mm (external dimensions), +/-0.02mm (mating surfaces), +/-0.1mm (wall thickness)
Surface Treatment	Chromate conversion (MIL-DTL-5541), Type II anodize, Type III hard anodize, conductive paint
Shielding Range	60-100dB from 100kHz to 1GHz (geometry dependent)
Max Dimensions	500mm x 400mm x 300mm
Internal Features	Heatsink fins, mounting bosses, cable glands, PCB standoffs, ventilation slots
Certifications	ISO 9001:2015, IATF 16949, RoHS, CE, MIL-DTL-5541
Lead Time - Prototype	7-12 days
Lead Time - Production	12-20 days (10-100 pcs), 20-30 days (100-500 pcs)
MOQ	1 piece (prototype), 10+ (production)
Origin	Dongguan, China

Applications

RF & Microwave Electronics: Enclosures for RF amplifiers, filters, and transceiver modules operating from HF through microwave frequencies
Medical Electronics: Shielded housings for patient monitors, diagnostic imaging interface modules, and surgical navigation electronics
Aerospace Avionics: EMI-tight enclosures for flight control computers, communication modules, and navigation equipment
Industrial Automation: Shielded enclosures for PLC controllers, servo drives, and sensor interface modules in electrically noisy environments
Test & Measurement: Shielded housings for oscilloscope front-end modules, spectrum analyzer components, and precision measurement electronics
Telecommunications: Enclosures for base station electronics, fiber optic transceivers, and signal processing modules

Why Choose Sinbo Precision

EMI-Aware Machining: We understand that EMI enclosures aren't just boxes - seam flatness, corner joint design, and surface conductivity matter as much as dimensions. Our machining approach treats shielding performance as a primary specification
Solid Billet Advantage: Machining from solid aluminum billets provides uniform wall thickness, no porosity (unlike die casting), and integration of heatsink fins and mounting features directly. This eliminates tooling costs for prototypes and low-volume production
Surface Treatment Expertise: Chromate conversion coating preserves aluminum's natural conductivity while providing corrosion protection - critical for maintaining EMI shielding effectiveness over time. We also offer conductive paint for applications requiring additional shielding enhancement
Internal Feature Integration: Heatsink fins, PCB mounting bosses, cable gland recesses, and ventilation louvers can all be machined into enclosure walls during the same setup, reducing assembly components and improving thermal and EMI performance
Design Support: If you're developing an EMI enclosure for the first time, we can advise on seam design, gasket selection, wall thickness trade-offs, and the relationship between machining approach and shielding effectiveness

Manufacturing Process

Design for Manufacturing Review: Analyze enclosure design for EMI shielding effectiveness - seam joint locations, wall thickness uniformity, gasket mounting surfaces, and internal feature accessibility
Material Procurement: Al 6061-T6 plate or billet per ASTM B211, oversized for cleanup and to account for residual stress in stock
Rough Machining: CNC 3-axis or 5-axis roughing to establish enclosure geometry - internal cavities machined first, then external profile, leaving 0.3-0.5mm stock for finishing
Stress Relief (if needed): For large enclosures or thin-wall designs, stress relief heat treatment to prevent distortion during finish machining
Finish Machining: Precision finishing passes on all surfaces - mating/seam surfaces machined last with minimal tool pressure to maintain flatness
Deburring & Edge Treatment: All edges deburred, sharp corners broken to 0.2-0.5mm radius unless otherwise specified
Surface Treatment: Chromate conversion coating (MIL-DTL-5541 Type II) or anodizing per specification - surface conductivity verified with point-to-point resistance measurement
Inspection & Packaging: CMM dimensional inspection, seam flatness verification, surface conductivity check - packaged in anti-static bags with foam protection

Frequently Asked Questions

Q: Why machine from solid billet instead of die casting?

A: For prototypes and volumes under 500 pieces, machining from solid eliminates the $10,000-50,000 tooling investment of die casting. You also get better dimensional accuracy (no draft angles, no shrink), no porosity (which can create EMI leakage paths), and the ability to change the design between units without new tooling. Above 1000 pieces, die casting becomes more cost-effective - but machining is faster to start and more flexible to change.

Q: Does anodizing affect the EMI shielding performance?

A: Yes, and it depends on the type. Type II (conventional) anodize creates a thin aluminum oxide layer that is electrically insulating - it can reduce shielding effectiveness at high frequencies. Chromate conversion coating (which is conductive) is the better choice for maximum shielding. If hard anodize (Type III) is required for wear resistance, we can strip the anodize from the mating/seam surfaces or apply conductive gaskets to maintain the electrical path.

Q: Can you provide EMC test data for the enclosures?

A: We don't have an anechoic chamber in-house, but we coordinate with third-party EMC testing labs to verify shielding effectiveness on your enclosure design. The test report provides shielding effectiveness data across your frequency range of interest. We've worked with customers to achieve 80-100dB shielding on machined aluminum enclosures.

Q: What's the minimum wall thickness you can achieve?

A: 1.0mm is achievable on small enclosures (<100mm). For enclosures larger than 200mm, we recommend 1.5mm minimum for structural rigidity and to maintain flatness on seam surfaces during assembly. The final wall thickness depends on your shielding requirements, enclosure size, and mounting method.

Q: Can you integrate PCB standoffs and mounting features?

A: Absolutely. CNC machining allows us to machine PCB mounting bosses, threaded inserts, alignment pins, cable gland pockets, and ventilation slots directly into the enclosure walls. This is one of the main advantages of machining from solid - every feature is built into one piece.

Tags:

Sinbo Precision Mechanical Co., Ltd.

CNC Mechanical Parts

CNC Turning Parts

CNC Milling Parts

CNC Machining Services

Cold Forging Parts

CNC Turning Milling Parts

CNC Aluminum Parts

CNC Stainless Steel Parts

CNC Brass Parts

CNC Stamping Parts

Machining Plastic Parts

Bending Sheet Metal Parts

New Energy Auto Parts

Energy Storage Connectors

Contactor Terminal

Battery Terminal Connector

CNC Manufacturing Solutions

CNC Mechanical Parts

CNC Turning Parts

CNC Milling Parts

CNC Machining Services

Cold Forging Parts

CNC Turning Milling Parts

CNC Aluminum Parts

CNC Stainless Steel Parts

CNC Brass Parts

CNC Stamping Parts

Machining Plastic Parts

Bending Sheet Metal Parts

New Energy Auto Parts

Energy Storage Connectors

Contactor Terminal

Battery Terminal Connector

CNC Manufacturing Solutions

products details

CNC Mechanical Parts

CNC Turning Parts

CNC Milling Parts

CNC Machining Services

Cold Forging Parts

CNC Turning Milling Parts

CNC Aluminum Parts

CNC Stainless Steel Parts

CNC Brass Parts

CNC Stamping Parts

Machining Plastic Parts

Bending Sheet Metal Parts

New Energy Auto Parts

Energy Storage Connectors

Contactor Terminal

Battery Terminal Connector

CNC Manufacturing Solutions

CNC Machined 6061-T6 Aluminum EMI Shielding Enclosure with 60-100dB Effectiveness and Precision Seams