|
Carbon steel 1045 is the workhorse of the power transmission world. It's not exotic or expensive, but when you need a gear shaft that's going to transmit 150kW at 1800rpm for the next 10 years without developing cracks at the keyway fillet, 1045 medium-carbon steel is where most engineers land. It has the hardness after heat treatment to resist gear tooth wear, the core toughness to handle shock loads from motor startups, and the machinability that doesn't strain your tooling budget.
The engineering challenge on a gear shaft isn't the material selection—it's the geometry. You're turning a cylindrical shaft with journal surfaces, mounting shoulders, keyways or splines, and sometimes a gear profile integrated into the shaft. The journals need to be concentric to each other within 0.01mm. The gear teeth (if cut directly on the shaft) need to meet AGMA quality grade 8 or better. And the entire shaft needs to be straight—TIR less than 0.03mm over its full length—because any runout at 1800rpm translates directly into vibration.
We turn gear shafts ranging from 30mm diameter pump shafts to 150mm diameter gearbox input shafts up to 1500mm long. For 1045, the standard process is: rough turn with oversize stock, heat treat to HRC 28-35 (depending on application), finish turn the journals, mill the keyway, and grind the critical journal surfaces if the tolerance calls for it.
The heat treatment is the step that separates the shafts that last 10 years from those that develop keyway cracks at year two. If the heat treater doesn't control the quench properly, you get a hard case with a brittle core—or worse, a shaft that's hard on one side and soft on the other. We work with heat treatment partners who understand what 1045 needs: through-hardening capability with controlled cooling to prevent distortion.
| Specification | Details |
|---|---|
| Product Name | CNC Turned Carbon Steel 1045 Gear Shaft |
| Material Options | 1045 Carbon Steel, 4140 Alloy Steel, 42CrMo (high strength) |
| Tolerance | +/-0.01mm (journal diameter), +/-0.02mm (length/shoulder), 6H thread |
| Surface Treatment | Black oxide, zinc plating, phosphate coating, or as-machined |
| Hardness | HRC 28-35 (standard), HRC 40-45 (high wear), custom per spec |
| Max Length | 1500mm (standard), up to 2500mm with steady rest |
| Certifications | ISO 9001:2015, IATF 16949, RoHS |
| Lead Time - Prototype | 5-10 days |
| Lead Time - Production | 10-15 days (10-100 pcs), 15-25 days (100-500 pcs) |
| MOQ | 1 piece (prototype), 10+ (production) |
| Origin | Dongguan, China |
video
video
video
video
video
Address
Factory 1: No.7,Mingzhu 2 road,Shebei,Huangjiang,Dongguan,Guangdong,China 523752 Factory 2: No.19,Mingzhu 1 road,Shebei,Huangjiang,Dongguan,Guangdong,China 523752
Tel
86-769-83391025-8005
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
